How to Reverse the Ultraloq Smart Lock Handle/Knob?
When installing Ultraloq Smart Lock, you may find that you need to switch the handing to adaptive for the right unlock or left unlock. The good news is, Ultraloq makes this process quick and easy with just a few steps.
This article contains the following models:
Ultraloq UL3/UL3-BT/UL3-BT(2nd Gen)
Step 1. Follow the Installation Guide to install the Ultraloq UL3/UL3-BT/UL3-BT(2nd Gen) Interior Assembly and Exterior Assembly.
Step 2. Choose the correct direction to press lever handles onto handle posts. The clip must be inserted to the handle's side hole.
Ultraloq U-Bolt/U-Bolt Pro
Step 1. Follow the Installation Guide to complete the installation of U-Bolt/U-Bolt Pro.
Step 2. Calibrate the direction of U-Bolt/U-Bolt Pro.
Method A: Set the lock's direction in the Settings page by the U-tec. You can follow this Video to set.
Method B: Set the lock's direction through the local operation. Take out one battery. >> Rotate the knob and keep it in a horizontal position to stay locked. >> Insert the Battery again.
Rotate the Ultraloq Lever's handle freely. Don't need do anything.
Step 1. Follow the Installation Guide to complete the installation of UL1/Combo.
Step 2. Keep pushing down the inside handle of UL1.
Step 3. Use a paperclip to push the Reset hole around one second until you hear one "beep" from UL1.
Step 4. Calibration is done.
Step 1. Before installation the lock, please loose the screw inside the hole. Please don't take the screw out during the operation.
Step 2. Take out the handle and adjust it to the correct direction.
Step 3. Tighten the screw to fix the handle.