How to Install the Ultraloq Lever?
Ultraloq Lever is designed for single-hole doors, doors without a deadbolt. Please check the below picture to confirm the standard single-hole door has been ready.
Please watch our easy step by step installation video before attempting to install your Ultraloq Lever lock.
There are some tips while installing the lock, please confirm you did not make mistake.
1. The latch's angle faces jamb.
2. The latch's spindle hole can't be titled.
3. Route the cable through the hole above the latch.
4. The spindle is connected to the exterior assembly of the Ultraloq Lever. Please don't pull out the spindle.
5. Both handles of the Ultraloq Lever can be rotated freely for the right unlock or left unlock.