How to Upgrade the Firmware of Ultraloq Smart Lock?
If you added the lock to the U-tec App, you can upgrade the firmware of Ultraloq Smart Lock. Firmware updates are released periodically to help improve the connection speed, fingerprint reliability, motor control, battery life, Auto Lock, etc.
Firmware updates can take anywhere from 2-5 minutes. Be sure to keep your phone near your lock, with the U-tec app open throughout the whole update.
Ultraloq U-Bolt/U-Bolt Pro
Ultraloq UL3-BT(2nd Gen)
This article contains the following sections:
How to upgrade the firmware?
Step 1. Unplug the Bridge from the outlet. If you are not using the Bridge, please ignore this step.
Step 2. Open the U-tec App, select the lock which you want to update.
Step 3. Click the Settings menu (gear icon).
Step 4. Scroll to Firmware then click it.
Step 5. Click Upgrade and complete the upgrade.
Upgrade Firmware Tips:
> Be sure to keep your phone near your Ultraloq Smart Lock, with the U-tec App open throughout the whole update.
> You must be within 5ft to the lock and have Bluetooth enabled on your phone.
> Unplugging the Bridge from the outlet before you are ready to upgrade firmware.
> Disconnecting the other Bluetooth devices from your phone.
How do I know if my firmware update is complete?
You can check the firmware notification under the Settings Menu on the U-tec App. Red Dot means the new firmware is released and ask to upgrade. Without Red Dot means the firmware has been the latest version.
What if the firmware update fails?
If the firmware update fails while you are in the middle of updating, try the following:
Step 1. Restart your phone.
Step 2. Power cycle your lock by removing and reinserting one of the batteries. If the battery low, please replace the brand new batteries.
Step 3. Stand near the interior assembly of the Ultraloq Smart Lock.
Step 4. Check above Tips again.
Step 5. Then try updating the firmware again.